 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Order this document by MC12100/D 200 MHz Voltage Controlled Multivibrator * * * * * High Frequency VCM Ideal for PLL Applications Single External Resistor Determines Center Frequency; Additional Resistor Determines f/V Sensitivity Internal Ripple Counter (1/2, 1/4, 1/8) For Low Frequency Applications - TTL/ECL Outputs VCO Output Enable Pins (TTL/ECL Level) +5.0 V Single Supply Voltage MC12100 200 MHz VOLTAGE CONTROLLED MULTIVIBRATOR SEMICONDUCTOR TECHNICAL DATA 20 1 P SUFFIX PLASTIC PACKAGE CASE 738 Pinout: 20-Lead Plastic Package (Top View) EBT 20 EBE VCC2 FOE 19 18 17 FOE 16 FSE 15 FSE VCC3 14 13 FST 12 VEE3 11 19 3 4 8 FN SUFFIX PLASTIC PACKAGE CASE 775 (PLCC) 1 VCC1 2 NC 3 RF 4 RS 5 VC 6 CB 7 VEE1 8 FS 9 OE 10 VEE2 Not Recommended For New Designs PIN NAMES Pin RF, RS VC CB FS OE FST FSE, FSE FOE, FOE EBE EBT Function Center Frequency Inputs Frequency Control Input Bias Filter Input Frequency Select Input TTL Output Enable TTL /2, /4, /8 Output Diff ECL /2, /4, /8 Outputs Diff ECL /1 Outputs VCO Disable, ECL Level Input VCO Disable, TTL Level Input Pinout: 20-Lead PLCC Package (Top View) VCC2 FOE FOE FSE 18 EBE EBT VCC NC RF 19 20 1 2 3 4 RS 5 VC 6 7 8 FS 17 16 15 FSE 14 13 12 11 10 9 VCC3 FST VEE3 VEE2 OE ORDERING INFORMATION Device MC12100P Operating Temperature Range TA = -40 to +75C Package Plastic CB VEE1 (c) Motorola, Inc. 1997 Rev 1 MC12100 Figure 1. Block Diagram (ECL) FOE FOE 10 11 7 1 13 18 17 16 FSE FSE 15 14 (TTL) FST 12 9 OE 10K VCC CENTER FREQUENCY SET RX RF RY RS CF 5 VC CB FREQUENCY CONTROL INPUT 6 CB BIAS FILTER 7 20 19 EBT (TTL) EBE (ECL) 4 3 VCO RIPPLE COUNTER 1 3:1 MULTIPLEXER 10K 8 FS FREQUENCY SELECT FUNCTION TABLE FS Level H OPEN L Divide Ratio 1/2 1/4 1/8 VCO DISABLE FUNCTION TABLE EBE H L or OPEN H EBT H or OPEN H L FOE, FSE, FST L FOE, FSE H OSCILLATION OSCILLATION ABSOLUTE MAXIMUM RATINGS Parameter Power Supply Voltage Symbol VCC1 VCC2 VCC3 VIN (TTL) VIN (ECL) IOUT(ECL) TJ TSTG Value -0.5 to 8.0 Unit V Input Voltage Input Voltage Output Source Current - Surge Output Source Current - Continuous Junction Operating Temperature Storage Temperature NOTE: ESD data available upon request. -0.5 to VCC -0.5 to VCC 100 50 140 -55 to 150 V V mA mA C C OPERATING CONDITIONS Parameter Ambient Temperature Supply Voltage TTL High Output Current TTL Low Output Current Symbol TA VCC IOH (TTL) IOL (TTL) Value 0 to 75 4.75 to 5.25 -1.0 20 Unit C V mA mA 2 MOTOROLA RF/IF DEVICE DATA MC12100 DC CHARACTERISTICS (VCC = 5.0 V 5%; RX = 2.4 k; RY = 1.5 k; CB = 0.001 F, unless otherwise noted.) 0C Characteristic Supply Current Output Low Voltage, TTL Output High Voltage, TTL Output Low Voltage, ECL Output High Voltage, ECL EBT Input Low Current EBT Input High Current Symbol ICC VOLT VOHT VOLE VOHE IILT IIHT Min 75 EBE Input High Current EBE Input Low Current FS Input, Max "L" Level FS Input, "Medium" Level FS Input, Min "H" Level EBT Input Low Voltage EBT Input High Voltage EBE Input High Voltage EBE Input Low Voltage VC Input Voltage, VC = VCC / 2 CB Output Voltage IINHE IINLE VILS VIMS VIHS VILT VIHT VIHE VILE VLM VCB 2.0 Max 120 0.8 Min 65 2.4 3.0 3.9 1.0 2.0 3.8 2.0 3.87 3.05 1.1 2.35 25C Typ 90 1.3 2.50 3.4 4.19 400 20 100 250 1.2 3.0 0.8 4.19 3.52 1.5 2.65 Max 110 0.5 75C Min 80 2.0 Max 135 0.8 Unit mA V V V V A A A A A V V V V V V V V V VCC = 5.0V VCC = 5.0V VCC = 5.0V VCC = 5.0V Condition EBT = EBE = VCC (ECL, TTL) FS = GND FS = GND VCC = 5.0V, RL = 50, VT = 3.0V VCC = 5.0V, RL = 50, VT = 3.0V VIN = 0.4V VIN = 2.7V VIN = 7.0V VIN = 4.19V VIN = 3.05V VCC = 5.0V VCC = 5.0V VCC = 5.0V AC CHARACTERISTICS (VCC = 5.0 V; RX = 2.4 k; RY = 1.5 k; CB = 0.001 F; VT = 3.0 V, unless otherwise noted.) 0C Characteristic Center Frequency (VVC - VCB = 0V) Frequency Range (VC = 1/2 VCC 1.5V, VCC = 5.0V) FOE/FOE/FSE/FSE Rise Time FOE/FOE/FSE/FSE Fall Time Reset Time Reset Time Reset Time Reset Time Reset Time Reset Time NOTE: 25C Max Min 180 85 0.5 0.5 Typ 200 100 Max 220 115 2.4 2.4 35 25 30 37 12 25 75C Min Max Unit MHz MHz ns ns ns ns ns ns ns ns EBTXFST EBTXFOE/FOE EBTXFSE/FSE EBEXFST EBEXFOE/FOE EBEXFSE/FSE Condition VCC = +2.0V VEE = -3.0V Symbol FO FMAX - FMIN trE tfE TTT TTO TTS TET TEO TES Min - Loading: ECL = 50 to VT; TTL = 500 , 50 pF MOTOROLA RF/IF DEVICE DATA 3 MC12100 Figure 2. VCO Detail 0.75V Limit OUTPUT FREQUENCY FORMULA 1) CENTER FREQUENCY : fOSC 1/2 VCC 2) GAIN : Af 280 ] VCC @ RY (MHz V) RX in k Units: 2.0 k RX 2.7 k ] RX6601.0 (MHz) ) RY in k Units: 1.0 k RY 2.0 k - 40K 40K + - + 1 VCB 6 5 4 3 CB = 0.001 F CF = 0.1 F RX VCC1 CB VCC1 VC RY CF Notes: * For optimum VCO linearity (MHz/V), the following resistor ranges are recommended: 2.0 k RX 2.7 k (RY = 1.5 k) 1.0 k RY 2.0 k (RX = 2.4 k) * TTL output maximum frequency = 50 MHz * Simultaneous use of both ECL and TTL outputs are not recommended due to excessive power consumption for the EIAJ Type II SO package Figure 3. AC Test Circuit (FO/trE/tfE Measurement) VCC = +2.0 VDC 1 9 3 18 13 0.1 F RX RY 4 14 5 15 6 0.001 F VIE VIT 7 0.1 F VEE = -3.0 VDC 10 11 0.1 F VEE = GND 6 19 20 50 pF 7 10 11 0.1 F 5 1 Figure 4. AC Test Circuit (Other Measurements) VCC = +5.0 VDC 18 13 0.1 F RX RY 16 17 3 16 17 4 0.1 F 50 14 15 50 12 50 +3.0 V 50 +3.0V 500 4 MOTOROLA RF/IF DEVICE DATA MC12100 Figure 5. Switching Waveforms TTT TTS TTO 50% EBT TEO TES 50% TET EBE FOE 50% FSE 50% FST 50% VCO DISABLE FUNCTION TABLE EBE H L or OPEN H EBT H or OPEN H L FOE, FSE, FST L OSCILLATION OSCILLATION FOE, FSE H MOTOROLA RF/IF DEVICE DATA 5 MC12100 Figure 6. VC versus Output Frequency (Varying RX @ VCC = 5.0 V; TA = 25C; RY = 1.5 k) 300 RX = 2.4k 250 OUTPUT FREQUENCY (MHz) OUTPUT FREQUENCY (MHz) RX = 2.0k 250 300 RY = 1.5k RY = 1.0k Figure 7. VC versus Output Frequency (Varying RY @ VCC = 5.0 V; TA = 25C; RX = 2.4 k) 200 RX = 2.7k 200 RY = 2.0k 150 150 100 100 50 50 0 1.5 2.0 2.5 VC (V) 3.0 3.5 4.0 0 1.5 2.0 2.5 VC (V) 3.0 3.5 4.0 Figure 8. VC versus Output Frequency (Varying TA @ VCC = 5.0 V; RX = 2.4 k; RY = 1.5 k) 300 300 Figure 9. VC versus Output Frequency (Varying VCC @ RX = 2.4 k; RY = 1.5 k; TA = 25C) 250 OUTPUT FREQUENCY (MHz) TA = 25C TA = 75C TA = 0C OUTPUT FREQUENCY (MHz) 250 VCC = 5.0V VCC = 5.25V 200 200 VCC = 4.75V 150 150 100 100 50 50 0 1.5 2.0 2.5 VC (V) 3.0 3.5 4.0 0 1.5 2.0 2.5 VC (V) 3.0 3.5 4.0 6 MOTOROLA RF/IF DEVICE DATA MC12100 OUTLINE DIMENSIONS P SUFFIX PLASTIC PACKAGE CASE 738-03 ISSUE E -A20 11 NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. DIMENSION L TO CENTER OF LEAD WHEN FORMED PARALLEL. 4. DIMENSION B DOES NOT INCLUDE MOLD FLASH. DIM A B C D E F G J K L M N INCHES MIN MAX 1.010 1.070 0.240 0.260 0.150 0.180 0.015 0.022 0.050 BSC 0.050 0.070 0.100 BSC 0.008 0.015 0.110 0.140 0.300 BSC 15 0 0.020 0.040 MILLIMETERS MIN MAX 25.66 27.17 6.10 6.60 3.81 4.57 0.39 0.55 1.27 BSC 1.27 1.77 2.54 BSC 0.21 0.38 2.80 3.55 7.62 BSC 0 15 1.01 0.51 B 1 10 C L -TSEATING PLANE K M E G F D 20 PL 0.25 (0.010) M N J 20 PL 0.25 (0.010) TA M M TB M Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. "Typical" parameters which may be provided in Motorola data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. Motorola does not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part. Motorola and are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer. Mfax is a trademark of Motorola, Inc. How to reach us: USA / EUROPE / Locations Not Listed: Motorola Literature Distribution; P.O. Box 5405, Denver, Colorado 80217. 1-303-675-2140 or 1-800-441-2447 Customer Focus Center: 1-800-521-6274 MfaxTM: RMFAX0@email.sps.mot.com - TOUCHTONE 1-602-244-6609 ASIA/PACIFIC: Motorola Semiconductors H.K. Ltd.; 8B Tai Ping Industrial Park, Motorola Fax Back System - US & Canada ONLY 1-800-774-1848 51 Ting Kok Road, Tai Po, N.T., Hong Kong. 852-26629298 - http://sps.motorola.com/mfax/ HOME PAGE: http://motorola.com/sps/ JAPAN: Nippon Motorola Ltd.: SPD, Strategic Planning Office, 141, 4-32-1 Nishi-Gotanda, Shagawa-ku, Tokyo, Japan. 03-5487-8488 MOTOROLA RF/IF DEVICE DATA MC12100/D 7 |
Price & Availability of MC12100FN
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |